Jet Pump Technology Accelerates Frac Load Recovery

Using a TFC Jet Pump for frac load extraction greatly decreases operator’s time to true production over other types of artificial lift

INTRODUCTION

A flowback is a process in which fracture fluid is recovered from the well to the surface. The process may also include the return of any energized gases and solids that have been injected into the well during the fracturing process. The purpose of the flowback is to safely recover the large volume of frac fluids from the well and transition the marketable hydrocarbons of the well stream to sales in a timely manner. Tech-Flo’s jet pump and flowback rental systems can greatly accelerate this process.

TECHNOLOGY

When utilizing a Tech-Flo hydraulic jet pump for frac fluid extraction, full load recovery is typically seen in 1/3 of the time when compared to other types of artificial lift (beam pump, gas lift, nitrogen injection). Production rates in excess of 4,000 bpd have been reached including amounts of gas reaching 2,000 mcfpd. The jet pump can also be serviced without a pulling unit or wireline and has excellent solids handling capabilities.

32,000 bbls in 14 Days

  1. Represents the natural flowback of the well ceasing and the necessity for artificial lift.
  2. Installation and production rates of the TFC jet pump.
  3. First show of hydrocarbons only 16 days post frac job.
  4. Net production of 32,000 bbls to bring the well back to a flowing state, through the jet pump BHA in only 14 days.